1300+ Sim Racing & Flight Simulation Products!
Best Prices!
Fast Global Shipping!
Webwinkel KeurmerkContact Us
0
1300+ Sim Racing & Flight Simulation Products!
Best Prices!
Fast Global Shipping!

Meca CUP Load Cell 3 Pedal Set without baseplate

Product description
The material used for the manufacture of the pedals is 3mm thick stainless steel. Stainless steel class 1.4301. Swivel and sliding bearings are made from bronze sliding segments, unibals on rods are used from the Automotive environment (stainless steel, aluminum, brass).The rods are made of stainless steel logs with lathed threads. Each of the thr...

The material used for the manufacture of the pedals is 3mm thick stainless steel. Stainless steel class 1.4301.

Swivel and sliding bearings are made from bronze sliding segments, unibals on rods are used from the Automotive environment (stainless steel, aluminum, brass).
The rods are made of stainless steel logs with lathed threads. Each of the three pedals are equipped with a Loadcell sensor. The brake pedal is equipped with the 200kg sensor.

Electronic sensors

Leo Bodnar, 16 bit. PC connection via USB cable,Plug and Play.
Calibration via DIVIEW software, leobodnar.com

The baseplate is made out of 8mm thick metal sheet which is powder coated. Attachement to the rig is through prepared holes, as per estabilished manufacturers. The grooves allow pedal positioning. The stainlesssteel parts are laser cutted with a CNC laser. Pedals are treated with ballotina (shot-peening).
Lathed parts: bronz mounting of each pedal, stainless thredded beams, Alu. brake segments, bronze thtottle pedal stops.

3D print

Material PETG, electronics boxes, delimitation between unibals in pedal lever, gas spring preload.

Screws and all connection materials

Stainless steel type A2.

 

THROTTLE pedal

  • Stainless steel construction
  • Bronze slide bearings
  • Loadcell sensor
  • Board for signal conversion from loadcell (analog-digital)

Very strong construction, no unwanted movements or squeaks.
Excellent response to foot with adjustable personal preferences.

Made to last through the usage of loadcells, quality materials, electronics and bronze lathed components.

Pedal can be tilted forwards by loosening the rear screws in the round groove in the rear of the pedal. The grooves allow the pedal to tilt by 18°.

The pedal height can be adjusted at the front part or by moving the remote posts in the rear. The shape and length of the pedal is adapted for the Heel and Toe technique.

Stiffness of the pedal can be also adjusted by moving the unibal in the groove of the pedal lever (main stiffness setting) and fine-tune the stiffness with the locking wheel that pre-tensiones the spring.

The pedal surface is treated with ballotin (glass blasting), which increases the adhesion.

 

BRAKE pedal

  • Stainless steel
  • Loadcell sensor 200Kg
  • Bronze slide bearings
  • Aluminum brake segments
  • Three different hardness of replaceable polyurethanes
  • The pedal can be adjusted both in height and longitude

Very strong construction, no unwanted movements or squeaks.
Excellent response to foot with adjustable personal preferences.

Made to last through the usage of loadcells, quality materials, electronics and bronze lathed components.

Pedal can be tilted forwards by loosening the rear screws in the round groove in the rear of the pedal. The grooves allow the pedal to tilt by 18°.

The pedal height can be adjusted at the front part or by moving the remote posts in the rear. The shape and length of the pedal is adapted for the Heel and Toe technique.

Stiffness of the pedal can be also adjusted by moving the unibal in the groove of the pedal lever (main stiffness setting) and fine-tune the stiffness with the locking wheel that pre-tensiones the spring.

The pedal surface is treated with ballotin (glass blasting), which increases the adhesion.

Replaceable polyurethane rollers for pedal hardness adjustment

Package includes rollers of three levels of hardness : black – soft (mounted to the pedal), blue – middle, orange – hard. By exchanging and combining the rollers with different hardness levels you can alternate from a soft pedal with a certain travel to a pedal that is extremely stiff with minimal travel. Rollers can be also combined to enable different options. For example; black, blue, orange which affects the linearity of stiffness when pressing the pedal.

Aluminum polyurethane stoppers

Each polyurethane is equipped with its own stopper (aluminum bowl). This ensures that each polyurethane is protected against its marginal limit load and further increase the modularity of the entire system. Explanation: Polyurethane rollers can be loaded until their weight load limit. Once the limit is breached the rollers become kegs and the attached sensors are no longer capable of reading the force applied to the pedal as the force is expelled out of the axis. This results in excessive deformation, feeling of unpleasant pedal drop and in particular in a reduction in the life expectancy of the roller.

Another important benefit occurs when the stoppers connect when fully pressing the break pedal simulating an entire pressurized break system with no more pedal movement. This leads to a hard break pedal resulting in a very similar feeling to breaking in a real car.

Stoppers therefore prevent excessive deformation, significantly extend the lifespan of the polyurethanes and contributes to a overall better braking feeling.

Strong construction, easily replaceable polyurethane rollers, excellent feeling when breaking, quality 100Kg Loadcell.

 

CLUTCH pedal

  • Stainless steel construction
  • Bronze slide bearing
  • Loadcell sensor
  • Custom board for signal conversion from loadcell (analog-digital)
  • The pedal can be adjusted both in height and longitude – Balotinated surface

Very strong construction, no unwanted movements or squeaks.

Excellent response to foot with adjustable personal preferences.

Made to last through the usage of loadcells, quality materials, electronics and bronze lathed components.

Pedal can be tilted forwards by loosening the rear screws in the round groove in the rear of the pedal. The grooves allow the pedal to tilt by 18°.
The pedal surface is treated with ballotin ( glass blasting), which increases the adhesion.

Clutch pedal operates on a cradle principle with pre-tensioned springs. The system works by depressing the pedal along a certain trajectory where at a given point the cradle tips over resulting in the reduction of pressure to the foot.

The pedal force can be adjusted by the pedal lever by repositioning it in its groove.

Solid construction, excellent control and a pedal feeling whilst accelerating just like in a real racing car..

 

WHAT’S INCLUDED

  • THROTTLE pedal with loadcell sensor
  • BRAKE pedal with loadcell sensor 200kg
  • Replaceable polyurethane rollers for pedal hardness adjustment
  • CLUTCH pedal- stainless steel construction
  • Electronic, USB cabel
  • Aluminum spacers
  • 12x screw – M6 x 20
  • 12x nut -M6
  • 12x underlay – 6mm
  • GT faceplate with grip

Reviews

5 / 5Based on 3 reviews
  • 5 / 5
    Posted by: Daniel on 28 July 2021
    A great set of pedals that can be relatively easily adjusted to give the feel an actual car. Mechanically these pedals are outstanding, and given the build quality, I believe they will be durable and easily maintained. Meca Co...
    A great set of pedals that can be relatively easily adjusted to give the feel an actual car. Mechanically these pedals are outstanding, and given the build quality, I believe they will be durable and easily maintained. Meca Control Panel v1.1 Beta is user friendly and overall a decent software package that will hopefully be improved upon over time.
  • 5 / 5
    Posted by: Kelly on 28 July 2021
    First off, I have to say that the shipping was incredible. Delivered in less than a week.

    I really do love the construction and design of the pedals. Very sturdy. And the pedal plate is amazing. No flex what so ever. I am s...
    First off, I have to say that the shipping was incredible. Delivered in less than a week. I really do love the construction and design of the pedals. Very sturdy. And the pedal plate is amazing. No flex what so ever. I am still playing with getting the brake pedal set the way I like it. I have tried a couple different combinations of bushings to find the stiffness I like. (The different bushings are included, where as the competitors are not.) I love the feel of the accelerator pedal and the realistic feel of the clutch pedal. Overall, I am very pleased with my purchase and would recommend to anyone.
  • 5 / 5
    Posted by: Sam on 26 July 2021
    Shipping was fast, only took 3 days. The pedals are amazing and it's a huge difference comparing to my Fanatec pedals. I'm very happy with my purchase.
    Price is good and the customer service from Simplace was great!

    Defi...
    Shipping was fast, only took 3 days. The pedals are amazing and it's a huge difference comparing to my Fanatec pedals. I'm very happy with my purchase. Price is good and the customer service from Simplace was great! Definitely recommend Simplace to anyone!
Create your own review

Previously viewed

Meca Cup Meca CUP Load Cell 3 Pedal Set
Meca CupMeca CUP Load Cell 3 Pedal Set

...

...

In stock

Deliverytime

€789,99 Incl. tax
Add
Compare 0

Add another product (max. 5)

Start comparison

Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »