8.9
Steering Wheels
GT Racing Steering Wheels
Formula Steering Wheels
Accessories
PC
Playstation
Xbox
Wheel base & direct drive systems
Sim Racing Cockpits
GT Cockpits
Formula Cockpits
Wheel Stands
Compact Sim Racing Cockpits
Monitor Mount & Stands
Motion System
Cockpit Accessories
Seats
GT & Rally Seats
Formula Seats
Sim Racing Pedals
Sim Racing Button Boxes
Flight Simulator Yokes
Throttle Quadrants
Rudder Pedals
Instrument Panels
Cockpit Gauges
Flight Simulator Chairs
Sim Racing Hardware
Flight Simulation Hardware
Brands
Qubic Motion System QS-220-PL
Patent pending linear actuators technology, modular and compact design, as well as the extremely quiet operation makes the QS-220-PL as a perfect motion base for professional application in various types of cockpits. The QS-220-PL motion set consisting of two actuators, power cabinet and motion controller (QS-MC6). Additional sets of QS-220-PL can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6DOF motion platform.
Specs
- Maximum velocity 800 mm/s
- Maximum acceleration 0.8 G
- Actuator stroke 100 mm
- Latency <8 ms
- Maximum control frequency 1000 Hz
- Vibration frequency range 0-100 Hz
QS-220-PL SET KEY FEATURES
Proudly made in EU: Engineered, Designed and Manufactured in Poland
Super silent – extremely quiet operation
Used by professional race car drivers and pilots around the world
Top quality ecosystem for personal and commercial applications
Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles
VR HeadWay technology support (VR sickness compensation)
Over 80+ integrated and supported racing and flight games
Compatible with professional simulation applications – Motion SDK (FSMI or FSDI) for software developers
The motion platform for sim racing & flight simulation
QS-220-PL is a modular and configurable motion system dedicated for special training applications. World’s fastest linear actuators with 800 mm/s velocity and maximum reduced of latency 8ms, gives possibility to build ready-to-go simulators for ground, sea and aircraft systems operators.
The QS-220-PL motion set is mainly intended for professionals as well as racing applications where reduced latency and maximum velocity are required.
- Ground vehicle simulators
- Driving simulators
- Simracing motion cockpits
- Virtual reality simulators for entertainment
- Forklift simulators
Application note
The PS-220-PL consists of two linear actuators, power cabinet and the compact control unit. This motion system can be easly extended to 3DOF configuration. The new generation of electrical cabinet is equipped with proprietary design electronics and software.
What's included?
Box 1. QS-220-PL motion set:
2x QS-L1 – linear actuator with cup holder
1x QS-SB2 – power cabinet (control module)
1x QS-SBML-2 – motion lock cable (up-link/down-link) – 2 m long
1x Power cable
Box 1. Dimensions
71 cm x 53 cm x 16 cm | 27.9 in x 20.9 in x 6.3 in
Box 1. Weight
30 kg| 66.14 lb
Box 2. QS-MC6 controller set:
1x QS-SBML-1 – motion lock with additional 2 m long cable
1x QS-MBT-1 – M-BUS terminator
1x USB cable – 0,5 m long cable (USB micro B)
1x CAT.5E patch cord cable – 2 m long
Box 2. Dimensions
20 cm x 20 cm x 13 cm | 7.9 in x 7.9 in x 5.1 in
Box 2. Weight
1 kg | 2.2 lb
Technical Specifications
GENERAL SPECIFICATION OF QS-220-PL SET
Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
Actuator stroke: 100 mm | 3.93 in
Maximum velocity:
◦ Q-Mode (230V): 800 mm/s
◦ Performance Mode (115V/230V): 400 mm/s
◦ Heavy Duty Mode (115/230V): 300 mm/s
Maximum acceleration:
◦ Q-Mode (230V): 0.8G*
◦ Performance Mode (115V/230V): 0.7G*
◦ Heavy Duty Mode (115/230V): 0.4G*
*value of acceleration is limited for safety reasons
Recommended payload in 3DOF (2x QS-220-PL) configuration:
◦ Q-Mode: 200 kg
◦ Performance Mode: 250 kg
◦ Heavy Duty Mode: 350 kg
Vibrations frequency range: 0-100 Hz
Maximum control frequency: 1000 Hz
Latency: <8 ms
Product weight: 30 kg | 66 lb
MAIN DIMENSIONS
Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
Cable length (QS-L1 actuator – QS-SB2 Power cabinet): 1150 mm | 45.2 in
POWER REQUIREMENTS
Power supply requirements: 115/230 VAC Single Phase
Average power consumption in 3DOF configuration:
◦ Q-Mode: 260W (230V)
◦ Performance Mode: 280W (230V), 270W (115V)
◦ Heavy Duty Mode: 436W (230V), 462W (115V)
Peak current for breaker specification in 3DOF configuration:
◦ Q-Mode: 5.17A (230V)
◦ Performance Mode: 4.55A (230V), 7.35A (115V)
◦ Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
Connection: USB
Software
Even most advanced hardware is nothing without good software. QubicManager powered by Motion Systems company is professional and specialized software for the platform and is click and play compatible with all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles.
Over 80 integrated and supported racing and flight games.
Qubic Motion System QS-220-PL
Do you have a question about this product?
Our team is there to answer all your questions
