1300+ Sim Racing & Flight Simulation Products!
2 Year Warranty
Global Shipping!
Contact Us
0
1300+ Sim Racing & Flight Simulation Products!
2 Year Warranty
Global Shipping!

T1000 3 Motions 'SV (3DOF)

Product description
ProSimu has been manufacturing motion simulators since 2009, we also manufacture high-performance actuators dedicated to the training of Rally, GT, and F1 drivers! These actuators are dedicated to automotive simulation and also to aeronautics. We are pioneers in our field and we created the T1000 3 Motion in 2015 with the integration of overstee...

ProSimu has been manufacturing motion simulators since 2009, we also manufacture high-performance actuators dedicated to the training of Rally, GT, and F1 drivers! These actuators are dedicated to automotive simulation and also to aeronautics.

We are pioneers in our field and we created the T1000 3 Motion in 2015 with the integration of oversteer.

Our showrooms are located inside the Le Mans circuit (in the Mulsanne Straight line of “Hunaudières” ) and in Montreal

 

The T1000 3 motion Silent Version will convince you with it's 3 strong points!!

 

1 ) Oversteering has been part of the 3M T1000 DNA since its creation in 2015!

Why simulate oversteer?

Oversteer will allow you to feel the loss of grip, grip and mass transfer of your sports car.

Only a simulator equipped with oversteer can provide you with this valuable information which will allow you to correct your trajectory and gain tenths of a second at each lap! A direct drive steering wheel or a 4-cylinder simulator will not be able to give you this important information.

 

 

2) T1000 3M Version S as Super performance, Super precision thanks to PRS 50/200 actuators.

Only the ProSimu actuators: PRS 50 and PRS 200 will allow you to feel the road effect like a real driver and to have good haptic feedback from your vehicle AND the road (with its 100mm travel) as in real life.

Thanks to the ProSimu actuators PRS 50/PRS 200, feel an even more immersive " road effect ", with its 44 movements per second!

The jolts with each gear change as in real life and the intelligent vibrations thanks to the dedicated internal microprocessor!

And especially Impacts during braking and acceleration with its 200-280 mm/s and 1G or even 2G in acceleration!

Our goal is to be as close as possible to reality thanks to our high-performance actuators which are able to bring you closer to the behaviour of a real vehicle. Our specifications established with real pilots allowed us to establish the following specifications for the design of our actuators:

  • No delay between the image and the movement of the simulator/actuator thanks to our own ProSimu electronic card between the PC and the motors.
  • A speed of up to 280mm/s and even more at peak: for braking impact and acceleration.
  • Movements of up to 44 movements per second for vehicle and road vibration and haptic feedback.
  • We always keep the possibility of choosing actuators of
    • 100mm exclusive automotive simulation.
    • 150mm automotive and aircraft/space simulation.
    • 200mm simulation aircraft only.
    • You can choose actuators with large deflections and reduce them with our software
  • Automotive simulation is the most performance demanding, our actuators adapt too very easily to aircraft simulation with softness and amplitude.

 

Designing high-performance actuators dedicated to piloting is one thing, but building a chassis capable of exploiting them to the best of their ability is the condition to bring you closer to real piloting!

At ProSimu, we've been doing both since 2009 and that's where the difference lies! We know exactly what the pro-driver must feel through our chassis AND actuators!

We work every day with pilots who train on our simulators and in particular the T7 Pro!

 

3)

S for Silence.

We listened to user requests and made a quieter simulator.

 

But that's not all :

You now have the possibility of putting a slide under the seat and the choice of chassis: T1000 steel or T1000 Aluminium!

We have gone even further in R&D with:

A system of captive feet

Noise reduction for incredible silence,

A single USB cable to control all actuators,

Anti EMI shielded cables, a single BOX for all actuators.

 

All our simulators will now be equipped with actuators manufactured by PROSIMU PRS 50 & PRS 200, specially studied and designed 100% for automotive and aeronautical simulation.

 

* Decompression valve and eco-responsible!

Innovative Prosimu system with the dump valve.

In order to have an “impact” in acceleration and such performance, we use a decompression valve (dump valve) so as not to have overpressure or negative pressure inside the actuator!

This innovative principle is only available on our PRS 200 actuators! In addition, it allows you to use less engine power and to have an eco-responsible approach.

ProSimu is the only actuator manufacturers in the world to use a decompression valve to obtain these exceptional performances and to equip our simulators.

Reviews

0 / 5Based on 0 reviews

There are no reviews written yet about this product..

Create your own review

Previously viewed

ProSimu T1000 3 Motions 'SV (3DOF)
ProSimuT1000 3 Motions 'SV (3DOF)

...

...

In stock

Deliverytime

€4.635,00 Incl. tax
      Add
      Compare 0

      Add another product (max. 5)

      Start comparison

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »