Trak Racer TR160 MK4
TR160 MK4 RACING SIMULATOR OVERVIEW
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black. Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets - mounted to the side for additional support.
Heavy-duty anodized black 90-degree brackets connect the frame and laser cut carbon steel plates allow you to attach your peripherals. The TR160 supports the strongest Direct Drive Force Feedback systems on the market and of course, is also Belt Drive Wheel Ready.
The TR160 is pre-drilled and for all popular steering wheels, pedals and shifters on the market and comes with your choice of 4 Stiffened Wheel Mounts for No-Flex Racing as well as options for pedal deck, shifter mount and more.
The Trak Racer accessory range is also constantly evolving to offer over 30 add-on options including speaker mounts, monitor stands, bass shaker mounts, keyboard mounts and more. Designed and Engineered in Australia.
Key Benefits of TR160 Mk4:
Rigid 160mm x 40mm thicker-walled Aluminium Extrusion Profile - Anodized Black
Side-Mounted Wheel Uprights with 160 x 40mm Heavy Duty Brackets
Shifter Mount and Over-sized Support Profile
Over 30 optional accessories
Compatible with TR One Wheel and Shifter Mounting Systems
Wheel Mount - Heavy-duty Wheel Plate (SKU: TR80-WMPLATE)
Pedal Support Plates - Pedal Mount must be selected (select from the Pre-Drilled Pedal Plate OR Aluminium Profile Pedal Mount with Heel Plate)
Universal Gen 2 Shifter Mount and Over-sized Shifter Support
Set of 10 Cable Ties
Red Coloured Strips
160mm x 40mm Black Anodized Aluminium Chassis
160mm x 40mm Black Anodized Aluminium Wheel Supports
All Mounting Screws, Brackets and Fixtures included
Assembly Tool Kit Included
INTRODUCING the TR ONE Wheel Mounting System
The TR One Wheel System will allow you to purchase updated wheel mounts that fit the base (and most expensive) part of the kit.
The base kit (Part Number: TR80-NWMA) consists of 2 High-Quality 80x40mm Aluminium Profiles and 4 Red Anodised Aluminium Plates. Optional wheel mounts include a wheel deck and direct-drive front mounting plate. The plates themselves are extremely rigid and have a lot of adjustment for angle and forward/backward fine-tuning - to get a perfect position!
TR160 Manual --> Download Here
- Posted by: Chris G. on 31 July 2022Purchased a rig in April 2021 during the COVID lockdown. The communication from TR staff about likely delays etc was great however i did NOT experience too much of a delay. The shipping was prompt, well packaged and not a scra...Purchased a rig in April 2021 during the COVID lockdown. The communication from TR staff about likely delays etc was great however i did NOT experience too much of a delay. The shipping was prompt, well packaged and not a scratch on the rig. RS6 Rig: The entry level rig was exactly what i was looking for. The footprint wasn't too big, but as a bigger unit I didnt feel cramped at all. Minimal to no flex under load that i experienced using Fanatec CSL Elite and loadcell pedams. TR160: recently upgraded from the RS6 to the top end TR160 rig... hoooooolllllyyyyy cocopops... what a rig. This thing is solid, well-engineered, and isnt too much bigger than the RS6 but the options to configure however i want are endless. I'm DIY-incompetant... the level of support from the facebook page, and the staff have made troubleshooting the builds easy, and for the most part a pleasure to build. The updated user manuals are very easy to read and understand. Simplace have me for over $2500... and it is worth every single dollar.
- Posted by: Colby G. on 31 July 2022Purchased a Tr160 couldn't be happier. Set aside time to build it will take a while even if you are competent with tools, the work is just a little tedious. Instructions aren’t stellar but once you figure out which set you nee...Purchased a Tr160 couldn't be happier. Set aside time to build it will take a while even if you are competent with tools, the work is just a little tedious. Instructions aren’t stellar but once you figure out which set you need to be going off it becomes easy to follow. My only complaint is switching between driver sizes has caused a number of scratches to happen. Its adjustable but not rapidly. I share it with my 6 year old son and we have found a set up that works for both of us. First Sim rig and I was really questioning whether it was worth the investment. Having played for a while now I am very pleased with it. I like playing the racing games now. If you are in the market have the money and space… do it. It’s really fun and everyone wants to play it.
- Posted by: Richard on 31 July 2022I've simraced since 2008 and been buying the latest and greatest whenever products have gotten better throughout the years. Next "greatest product" on my list became the TR160 Mk4. This thing is a beast, hands down the best lo...I've simraced since 2008 and been buying the latest and greatest whenever products have gotten better throughout the years. Next "greatest product" on my list became the TR160 Mk4. This thing is a beast, hands down the best looking ALU-profile rig on the market at a very competitive price. I highly recommend getting the TR120 or the TR160 with the wheelmount specific for your wheel. I'm rocking a Fanatec Podium DD1 with the TR One Fanatec wheelmount and this is a beast.